![background image](/i/infiniti/153650/infiniti-g37-coupe-2008/h/infiniti-g37-coupe-2008-255.png)
4. The system confirms the recognized com-
mand, and a list of command list catego-
ries appears.
5. Locate your desired voice command in the
list using the INFINITI controller. Selecting
a category lists its voice commands.
6. Push the TALK
switch and enter the
command.
Operating tips
●
Voice commands cannot be accepted when
the icon is
.
●
The list displayed can be scrolled by tilting
the ENTER switch on the steering wheel.
●
If the command is not recognized, the sys-
tem announces, “Please say again”. Repeat
the command in a clear voice.
●
Push the BACK button once to return to the
previous screen.
●
If you want to cancel the command, push
and hold the TALK
switch for 1 sec-
ond. The message “Voice canceled” will be
announced.
●
Push the TALK
switch again to pause
the operation. Push the TALK
switch
to restart the operation.
●
If you want to adjust the volume of the
system feedback, push the volume control
buttons (+ or
2
) on the steering wheel or use
the audio system volume knob while the
system is making an announcement.
How to speak numbers
INFINITI Voice Recognition requires a certain
way to speak numbers in voice commands.
Refer to the following examples. (General rule:
Either “zero” or “oh” can be used for “0”).
Radio frequencies
Speak radio frequencies according to the fol-
lowing examples:
●
930 kHz
– “Tune nine thirty AM.”
– “Tune nine thirty.”
●
1000 kHz
– “Ten hundred.”
●
1040 kHz
– “Tune ten forty.”
●
1710 kHz
– “Tune seventeen ten.”
●
97.9 MHz
– “Tune ninety seven point nine.”
●
100.5 MHz
– “Tune one hundred point five.”
●
101.1 MHz
– “Tune one oh one point one FM.”
SAA1784
Monitor, climate, audio, phone and voice recognition systems
4-87
w
—
—
07/14/07—pattie
X