![background image](/i/infiniti/152206/infiniti-qx56-2007/h/infiniti-qx56-2007-236.png)
mode. To change the mode, push the ON/OFF
switch once, then turn on the system again.
Always confirm the setting in the Intelligent
Cruise Control system display.
WARNING
●
In the conventional (fixed speed) cruise
control mode, a warning chime will not
sound to warn you if you are too close
to the vehicle ahead.
●
Pay special attention to the distance
between your vehicle and the vehicle
ahead of you or a collision could occur.
For the vehicle-to-vehicle distance control mode,
see the following description. For the conven-
tional (fixed speed) cruise control mode, see
page 5-33.
VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE
In the vehicle-to-vehicle distance control mode,
the Intelligent Cruise Control (ICC) system auto-
matically maintains a selected distance from the
vehicle in front of you according to that vehicle’s
speed, up to the set speed or at the set speed
when the road ahead is clear.
With ICC, the driver can maintain the same
speed as other vehicles without the constant
need to adjust the speed as you would with a
normal cruise control system.
PRECAUTIONS ON VEHICLE-TO-
VEHICLE DISTANCE CONTROL
MODE
The system is intended to enhance the operation
of the vehicle when following another vehicle
traveling in the same lane and direction.
If the distance sensor
s
1
detects a slower mov-
ing vehicle ahead of you, the system will reduce
your speed so that you follow the vehicle in front
of you at the selected distance.
The system automatically controls the throttle
and applies the brakes (up to 25% of vehicle
braking power) if necessary.
The detection range of the sensor is approxi-
mately 390 ft (120 m) ahead.
Conventional (fixed speed) cruise control
mode
LSD0129
LSD0105
5-18
Starting and driving
Z
REVIEW COPY—
2007 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
07/08/06—tbrooks
X