![background image](/i/infiniti/149998/infiniti-qx56-2009/h/infiniti-qx56-2009-040.png)
Attaching the 3rd row center seat belt
Always be sure the 3rd row center seat belt
connector tongue and connector buckle are at-
tached. Disconnect only when folding down the
rear seat.
To connect the buckle:
s
1
Pull out the connector tongue from the re-
tractor base.
s
2
Pull out the seat belt tongue from the fabric
sleeve.
s
3
Pull the seat belt and secure the receiver
buckle until it clicks.
The center seat belt connector tongue and re-
ceiver buckle are indicated by the > and < mark.
The center seat belt connector tongue can be
attached only into the rear center seat belt con-
nector buckle.
To fasten the seat belt, see “Fastening the seat
belts” earlier in this section.
WARNING
●
Do not unfasten the rear center seat
belt connector except when folding
down the rear seat.
●
When attaching the rear center seat
belt connector, be certain that the seat-
backs are completely secured in the
latched position and the rear center
seat belt connector is completely
secured.
●
If the rear center seat belt connector
and the seatbacks are not secured in
the correct position, serious personal
injury may result in an accident or sud-
den stop.
LRS0433
1-24
Safety—Seats, seat belts and supplemental restraint system
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X