![background image](/i/involight/101242/involight-dd6/h/involight-dd6-008.png)
8 of 8 pages
channels, can pass the singled function checking.
C. Under the second-class function PREHEATING menu, press ESC to exit
second-class function menu, enter the first-class function menu。Press MENU to enter
third-class function menu
D. 1. Setup ALL for the third-class function in PREHEATING menu, If preheating value of
the first channel is 20%, then show the diagram as following:
Press the UP/DOWN once, preheating value adds/reducer 1%, this time
all the channels work the same as the first channel, press the key
And hold it more then two seconds, it will speed up adding/reducing
Preheating value by 1%, all preheating values range 000%-050%. Press
ESC to exit PREHEATING third-class function menu, enter PREHEATING
Second-class function menu All mode。It is invalid to press MENU.
E. 2 Setup Single for preheating third-class function menu。If preheating
value of the first channel is 23%, the movable light cursor will be under the channel
sequence number, showing the diagram as following:
Press UP/DOWN, The channel sequence number adds/reduces 1, it will shows the
preheating value on the second line, press the key and hold it more than two seconds,
All
[020%]
Chan[1]
[023%]