1
Thank you for purchasing this product. To optimize the performance of this product,prior to
use,please read these operating instructions carefully to familiarise yourself with the basic
operation of this unit.Please keep the manual in safe price for future reference.
This unit has been tested at our factory before being shipped to you, there is no assembly
required.
Once after received this product , please take and put carefully. And check cautiously that
whether the product was damaged or not during the transportation.
Checking Parts
Please check if the following parts are included:
1 x LED light
1 x User manual
1 x Power cable
1 x DMX cable
1 x Safety robe
2 x Quick lock handle
Safety Instructions
important
Every person involved with the installation , operation and maintenance of this device has to be
qualified and follow the instructions of this manual . Manufacturer will not with responsibility for
those operation not according to this Instruction
Verify that the voltage matches the rated voltage.
When the voltage is 110V , Do not connect more than 10 lightings in total to AC mains power
in one interconnected daisy chain
When the voltage is 220V , Do not connect more than 20 lightings in total to AC mains power
in one interconnected daisy chain
Before using the fixture, check that all power distribution equipment and cables are in perfect
condition and rated for the current requirements of all connected devices.
Always ground (earth) the fixture electrically .
Avoiding hit the Light when you are move or install the light .
Do not expose the fixture to rain or moisture.
Avoid looking directly into the light source (especially those who suffer from epileptic fits)
Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures higher
than this .
The Maximum surface temperature is 50°C
