![background image](/i/involight/102831/involight-movingbar2409/h/involight-movingbar2409-004.png)
1)
LED function
When choose “led”, and press “SETUP” enter to LED auto running parameter setting.
You could choose e-Auto or e-Manul
When choose “e-Auto”, press “SETUP” button enter to the menu
Press “UP” and “DOWN” to select the parameter. When choose Speed will show:
Press “UP” and “DOWN” to adjust the auto running speed from 01-20
When choose “Freq.”, press “SETUP” to set the flash speed.
Press “UP” and “DOWN” to adjust the auto running speed 00-20Hz
When choose “e-Manul”, press “SETUP” button to set the LED brightness and the flash speed.
When choose “Gray”, press “SETUP” to set LED gray level. Press “UP” and “DOWN” to set from 000-255
When you choose “Freq.”, press “SETUP” to set the flash speed. Press “UP” and “DOWN” to set from 00-20Hz
2)
Bar function
Choose “Bar”, press “SETUP” enter to set the parameter.
You could choose m-Auto and m-Manul
When you choose “m-Auto”, press “SETUP” to set the speed 01-16
When you choose “m-Manul”, the bar stops stalling. Press “SETUP” enter to set the Bar lock position
Choose “L-BAR”, press “SETUP” to set the left bar through “UP” and “DOWN” When it is 90 °
,
the bar is in the
horizontal position. The same method to set the right bar.