DMX LED 4PAR 24*Tri-9w manual
Our DMX LED 4PAR system offers many possibilities to achieve the effects which you want. It is pack-and-go
for DJs, bands, nightclubs and other performers who want a complete LED wash light system. This system
includes PAR-BAR, a four-pedal foot switch, adjustable tripod, packing bag and transport case. Please read the
manual before operation.
A. SPECIFICATION:
1. Weight:9kg
2. Size:
845*305*68mm
3. Power input: AC100-240V/50-60HZ
4. Wattage: 200W
5. LEDS: 24*tri-9W
6. Beam angle: 45 degree
7. 3 pin female XLR socket and 3 pin male XLR socket
8. RGB control of 4 separate lights
9. Independent positioning of each light
10. four-pedal foot switch: auto run, sound active, freeze, blackout
11. Working place: indoor, temperature: -20 °C~+ 40° C
12
.
LED display for easier operation.
13. Selectable built-in programs, Auto running, DMX mode, M/S, sound-active mode.
14. 7selectable DMX modes:
2
,
3, 4, 7,8
,
14, 15
DMX channels mode.
B.OPERATION:
After power on, Press
“
MODE
”
button to activate the main menu: Built-in programs mode, Auto running
mode, DMX mode, Slave mode, sound-activited mode.
“
SETUP
”
is to set the relative specification for current mode.
“
UP
”
is to add the value of current specification.
“
DOWN
”
is to decrease the value of current specification.
Built-in programs-- running one of 14 built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode
Sound active mode-- running by sound - activated
four-pedal foot switch: auto run, sound active, freeze, blackout
1.
built-in programs mode
Press mode until it shows Prxx, you can select 14 different built-in Programs. press
“
SETUP
”
and
“
UP
”
“
DOWN
”
buttons to select the programs (from Pr01 to Pr14) and select the desired program values. When