www.jbl.com
E
ng
lis
h
17
GX-A3001 INPUT CONNECTION
Use a "Y"-adapter to connect your source unit or processor’s subwoofer line output to the amplifier’s left and right inputs, as shown in the illustration
below. If your source unit does not have a dedicated subwoofer output you can connect the rear left/right outputs to the amplifier’s left and right inputs.
L+L–R–R+
"Y"-Adapter
Source Unit
Subwoofer Output
See
Set The Crossover Controls,
on page 20, for information about setting the amplifier’s controls.
To use the speaker-level inputs instead of the line-level inputs, see
Using The Speaker-Level Inputs,
on page 12.