![background image](/i/karcher/169715/karcher-bd-55-40-c-ep/h/karcher-bd-55-40-c-ep-021.png)
-
8
Î
Turn the vacuum bar.
Î
Tighten the wing nuts.
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.
Î
Release the wing nuts.
Î
Tilt the vacuum bar.
Î
Tighten the wing nuts.
Î
Press the appliance to the bottom using
the push handle.
Î
Turn the running gear to the front with
your foot.
Î
Reducing the speed: Turn the button in
"–" direction.
Î
Increasing the speed: Turn the button in
"+" direction.
Î
Insert the looped end of the extension
cable in the strain relief hook.
Î
Plug in the mains plug.
Î
Turn the running gear to the back with
your foot.
Î
Turn the program selection switch to
the desired cleaning program.
Î
Adjust the water quantity using the reg-
ulating button according to the dirt on
the floor covering.
Î
Lower the vacuum bar.
Î
Turn on the brushes by pulling the con-
trol handle.
몇
Warning!
Risk of damage to the floor covering. Do
not operate the appliance on the spot.
Î
Close the water quantity regulator.
Î
Drive the appliance forward for another
1-2 m to draw off residual water.
Inclination
Setting the Advance Speed (Only
BD Model)
Establish mains contact
Cleaning
Shutting Down the Appliance
21
EN