-
10
Î
Have the prescribed inspection carried
out by the customer service.
Î
Remove the vacuum bar.
Î
Unscrew the star grips.
Î
Remove the plastic parts.
Î
Remove the vacuum lips.
Î
Insert new vacuum lips.
Î
Insert the plastic parts.
Î
Screw in and tighten the star grips.
Î
Empty the dirt water reservoir.
Î
Press the appliance to the bottom using
the push handle.
Î
Turn the running gear to the front with
your foot.
Î
Press the brush change key and tilt the
cover on the brush head towards the
side.
Î
Pull out the brush rollers.
Î
Insert and lock into place the new brush
rollers.
Î
Close the cover, align the brushes and
lock in the cover.
Î
Turn the running gear to the back with
your foot.
Î
Empty the dirt water reservoir.
Î
Press the appliance to the bottom using
the push handle.
Î
Turn the running gear to the front with
your foot.
Î
Turn the button for the setting of the ad-
vance speed in "– " direction.
Î
Press the pedal for changing the brush-
es downward beyond its resistance.
Î
Drive the appliance in reverse till the
disk brush is free.
Î
Remove the disk brush and place the
new disk brush in front of the appliance.
Î
Drive the appliance forward over the
disk brush.
Î
Turn the running gear to the back with
your foot. The brush will lock into the
brush drive.
Î
Set the advance speed.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
Yearly
Maintenance Works
Replacing the vacuum lips
Replacing the brush rollers
Replacing the disk brushes
Maintenance contract
23
EN