Инструкция для KARCHER NT 35/1 TACT BS

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

– 3

To switch off automatic filter cleaning:

Activate the switch.  Indicator lamp in 
the switch goes off.

To switch on automatic filter cleaning:

Press the switch again.  Indicator lamp 
in the switch glows green. 

Switch off the appliance at the main 
switch.

Pull out the mains plug.

Empty the container.

Vacuum and wipe the appliance inside 
and outside with a damp cloth.

Illustration 

Store the suction hose and the mains 
cable as shown in the illustration. 

Place the appliance in a dry room and 
secure it from unauthorized use.

Caution

Risk of injury and damage! Observe the 
weight of the appliance when you transport it.

Remove the suction pipe with the floor 
nozzle or oven nozzle from the holder. 
Hold the appliance at the handle and at 
the suction pipe to transport it.

When transporting in vehicles, secure 
the appliance according to the guide-
lines from slipping and tipping over.

Caution

Risk of injury and damage! Note the weight 
of the appliance in case of storage.

This appliance must only be stored in inte-
rior rooms.

Danger

First pull out the plug from the mains before 
carrying out any tasks on the machine. 

Open filter door. 

Replace the flat pleated filter.

Close the filter door, it must lock into 
place.

Release and remove the suction head.

Clean the electrodes with a brush.

If necessary, clean the upgrade kit for 
non-conducting media (optional) with a 
damp rag.

Insert and lock the suction head.

Danger

First pull out the plug from the mains before 
carrying out any tasks on the machine. 

Check cables, plugs, fuse, socket and 
electrodes. 

Turn on the appliance.

Empty the container.

Turn off the appliance and wait for 5 sec-
onds, turn it on again after 5 seconds.

Clean the electrodes as well as the 
space between the electrodes with a 
brush.

If necessary, clean the upgrade kit for 
non-conducting media (optional) with a 
damp rag.

Turn off the appliance

After each operation

Storing the Appliance

Transport

Storage

Maintenance and care

Exchanging the flat pleated filter

Cleaning the electrodes

Troubleshooting

Suction turbine does not run

Suction turbine turns off

Suction turbine does not start again 

after the container has been 

emptied

14

EN

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184