![background image](/i/kuppersberg/84989/kuppersberg-fa6if01/h/kuppersberg-fa6if01-032.png)
32
TROUBLESHOOTING
The hob or the cooking zone doesn’t start-up :
•
The hob is badly connected on the electrical network.
•
The protection fuse cut-off.
•
The locking function is activated.
•
The sensitive keys are covered with grease or water.
•
An object is put on a key.
The control panel displays [ U ] :
•
There is no pan on the cooking zone.
•
The pan is not compatible with induction.
•
The bottom diameter of the pan is too small.
Continuous ventilation after cutting off the hob :
•
This is not a failure, the fan continuous to protect the electronic device.
•
The fan cooling stops automatically.
One or all cooking zone cut-off :
•
The safety system functioned.
•
You forgot to cut-off the cooking zone for a long time.
•
One or more sensitive keys are covered.
•
The pan is empty and its bottom overheated.
•
The hob also has an automatic reduction of power level and breaking Automatic
overheating
The control panel displays [ L ] :
•
Refer to the chapter control panel locking page.
The control panel displays [ Er03 ] :
•
An object or liquid covers the control keys. The symbol disappear as soon as the key is
released or cleaned.
The control panel displays [ E2 ] or [ EH ] :
•
The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E3 ] :
•
The pan is not adapted, change the pan.
The control panel displays [ E5 ] :
•
Defective network. Control the voltage of the electrical network.
The control panel displays [ E6 ] :
•
Defective network. Control the frequency of the electrical network.
The control panel displays [ E8 ] :
•
The air inlet of the ventilator is obstructed, release it.
The control panel displays [ U400 ] :
•
The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, call the SAV.