10

ENG

ENGLISH

USING THE MONITOR SET

y

If you turn the Monitor set on while it is cold, 
the screen may flicker. This  is normal.

y

Some red, green, or blue spots may appear 
on the screen. This is normal.

y

"Self Image Setting" Function.

This function provides the user with optimal 

display settings.When the user connects 

the monitor for the first time, this function 

automatically adjusts the display to optimal 

settings for individual input signals.(Only 

supported in Analog Mode)

y

‘AUTO’ Function.

When you encounter problems such as 

blurry screen, blurred letters, screen flicker 

or tilted screen while using the device or 

after changing screen resolution, press the 

AUTO function button to improve resolution.

(Only supported in Analog Mode)

NOTE

NOTE

y

Connect the signal input cable 
and tighten it by turning the 
screws clockwise.

y

Do not press the screen with your 
finger for  a long time as this may 
result in temporary distortion on the screen.

y

Avoid displaying a fixed image on the 
screen for a long period of time to prevent 
image burn. Use a screensaver if possible.

CAUTION

Self Image Setting Function

Press the power button on the bottom panel to 
turn the power on. When monitor power is turned 
on, the "

Self Image Setting

" Function is executed 

automatically. (Only supported in Analog Mode)