A18

Troubleshooting

Display image is incorrect

●

The screen color is

mono or abnormal.

●

The screen blinks.

• Check if the signal cable is properly connected

and use a screwdriver to fasten if necessary.

• Make sure the video card is properly inserted in

the slot.

• Set the color setting higher than 24 bits (true color)

at 

Control Panel - Settings

.

• Check if the screen is set to interlace mode and if

yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA

DDC) monitor found" message?

●

Have you installed the

display driver?

• Be sure to install the display driver from the display

driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.

• Make sure to check if the video card supports

Plug&Play function.