I
Cleaning the motor filter (24)
The
motor
filter
is
situated
inside
the
appliance between the filter supporter (23)
and the motor. Each time that you change
the air outlet filter we advise you to pull the
handle on the filter supporter, remove the
motor filter (24) and to clean it by tapping
to remover the dirt and then replacing it in
the vacuum cleaner.
Cleaning the Hepa filter (25)
• Check the Hepa filter occasion-ally and
clean when dirty.
• Unplug cord from outlet.
• Open the filter cover (26) and remove
the Hepa filter as shown.
■ Cleaning the washable HEPA filter with water
at least once half a year.
• Hard floor Nozzle (28)
Efficient cleaning of hard floors
(wood, linoleum,etc.)
• Cleaning turbine brush nozzle (27)
Press the button on the rear side of the
nozzle to separate the air cover.
Use the dusting brush & crevice tool to
vacuum clean the brush and fan.
What to do if your appliance
does not work?
Check that the appliance is correctly plugged
in and that the electrical socket is working.
What to do when the suction
performance reduces?
' stop the appliance and unplug it.
’ Check that the tubes, flexible hose and
cleaning tool are not blocked.
' Check that the dust bag is not fulI.Replace
if necessary.
-
34
-