A8
Control Panel Functions
Function
Control
This Indicator lights up as white when the display
is operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to flicker.
Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to select an icon in the On Screen
Display.
AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode).
The best display mode is:
W1930S: 1360 x 768
W2230S: 1920 x 1080
Buttons
Use these buttons to select or adjust functions in the On
Screen Display.
(
4:3 IN WIDE
)
For more information, refer to page A12.
Button
Button
To select the image size of the screen.
• WIDE: Switch to full screen mode according to
input image signal.
• 4 : 3: Change the image signal ratio into 4:3.
WIDE
4:3
( )