A21
A21
Specifications W1952TE
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Signal cable
Power cord
19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 48.14 cm
0.285*0.285 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq.
56 - 75 Hz (Automatic)
Input Form
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital (HDCP)
Signal Input
15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max
Analog : VESA 1440 x 900 @75 Hz
Digital : VESA 1440 x 900 @60 Hz
Recommend
VESA 1440 x 900 @60 Hz
DDC 2B (Digital), DDC 2AB (Analog)
On Mode
:
19 W(Typ.)
Sleep Mode
≤
0.3 W
Off Mode
≤
0.3 W
With Stand
Without Stand
Width
45.15 cm / 17.78 inches
45.15 cm / 17.78 inches
Height
38.60 cm / 15.20 inches
32.20 cm / 12.67 inches
Depth
22.00 cm / 8.66 inches
5.61 cm / 2.21 inches
Net
3.9 kg (8.6 lbs)
Tilt
-5˚~20˚
AC 100-240V~ 50/60Hz 0.8A
Operating Conditions
Temperature
10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Attached( ), Detached ( O )
Attached( ), Detached ( O )
Wall-outlet type or PC-outlet type
