Инструкция для Lincoln MKS (2009)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

SECURICODE™ KEYLESS ENTRY SYSTEM

The keypad, located near the driver’s window, is invisible until touched
and then it lights up so you can see and touch the appropriate buttons.

Note:

If you enter your entry code too fast on the keypad, the unlock

function may not work. Re-enter your entry code more slowly.

You can use the keyless entry
keypad to:

•

lock or unlock the doors without
using a key.

•

open the trunk.

•

recall memory seat/power mirrors
and steering column positions (if
equipped).

•

enable or disable the autolock
and autounlock features

•

Activate Intelligent Access (if
equipped) at the driver door,
refer to

Intelligent Access

in this

chapter.

The keypad can be operated with the factory set 5–digit entry code; this
code is located on the owner’s wallet card in the glove box and is
available from your authorized dealer. You can also create up to three of
your own 5–digit personal entry codes.

Note:

If your vehicle is equipped with the Intelligent Access feature,

your keypad will still function normally if you enter your personal entry
code or factory set code. However, if your transmitter is within range of
the driver’s door, an Intelligent Access unlock will also occur each time
you press any number on the keypad. Note that this additional unlock
will not impact keypad functionality, and you can still enter your code
and perform all keypad functions (unlock, lock, trunk release).

Programming a personal entry code and keypad association to
memory seats, mirrors and steering column (if equipped)

To create your own personal entry code:

1. Enter the factory set code.

2. Within five seconds press the 1

•

2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.

Locks and Security

117

2009 MKS

(mks)

Owners Guide