Инструкция для Lincoln MKS (2010)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel and all applicable
lit components in the vehicle during
headlamp and parking lamp
operation.

•

Tap the top or bottom of the
control to brighten/dim all interior
lit components incrementally, or

•

Press and hold at the first position the top or bottom of the control
until the desired lighting level is reached.

•

Press and hold the top of the control to the full on position to activate
the “dome on” feature. This will turn on the interior courtesy lights.
The lights will remain on until the bottom of the control is pressed.

Note:

If the battery is disconnected, discharged, or a new battery is

installed, the dimmer control requires re-calibration. Press the dimmer
control from the full dim position to the full on position to reset. This
will ensure that your displays are visible under all lighting conditions.

AIMING THE HEADLAMPS

The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident, the alignment of your headlamps
should be checked by your authorized dealer.

Vertical aim adjustment

1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters) away.

•

(1) 8 feet (2.4 meters)

•

(2) Center height of lamp to
ground

•

(3) 25 feet (7.6 meters)

•

(4) Horizontal reference line

2. Measure the height of the
headlamp bulb center from the
ground and mark an 8 foot
(2.4 meter) horizontal reference line
on the vertical wall or screen at this
height (a piece of masking tape works well).

Lights

2010 MKS

(mks)

Owners Guide, 2nd Printing
USA

(fus)