Инструкция для Lincoln MKS (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Overriding Adaptive Cruise Control

WARNING:

Whenever the driver is overriding the ACC by

pressing the accelerator pedal, the ACC will not automatically

apply the brakes to maintain separation from any vehicle ahead.

You can override the set speed and gap distance by pressing the
accelerator pedal.

When you are overriding the system, the green indicator
light illuminates and the follow vehicle does not show in the
information display. The system will resume operation when

you release the accelerator pedal. The vehicle speed will decrease to the
set speed, or a lower speed if following a slower vehicle.

Changing the Set Speed

There are three ways to change the set speed:

•

Accelerate or brake to the desired speed and press

SET

upward and

release.

•

Increase or decrease the speed by holding

SET

upward or downward

until the desired set speed is shown on the information display.
The vehicle speed will gradually change to the selected speed.

•

Increase or decrease the speed in increments of 1 mph (2 km/h) by
briefly pressing

SET

upward or downward.

The system may apply the brakes to slow your vehicle down to the new
set speed. The set speed will display continuously in the information
display while the system is active.

Resuming the Set Speed

Note:

Resume should only be used if you are aware of the set speed and

intend to return to it.

Press and release

RES

. Your vehicle will return to the previously set

speed. The set speed will display continuously in the information display
while the system is active.

Cruise Control

201

2014 MKS

(mks)