USING VOICE COMMANDS WITH SYNC
姞
There is a push to talk button on your steering wheel controls labeled
either VOICE or
. Press to activate Voice Recognition. You will hear a
tone and LISTENING will appear in the radio display signaling that the
system is ready to accept your command. Speak the command clearly to
ensure that the system is able to recognize and perform the desired
function.
For the best voice recognition performance:
•
Ensure that the interior of the vehicle is as quiet as possible. Wind
noise from open windows and road vibrations may prevent the system
from correctly recognizing spoken voice commands.
•
After pressing VOICE or
, wait until the tone sounds and
LISTENING appears in the radio display before speaking a command.
Any command spoken prior to this will not register with the system.
•
At any time, you can interrupt the system while it is speaking by
pressing VOICE or
. The system will respond with a listening tone
and allow you to speak a command.
•
Speak naturally without large pauses in between words.
At any time, you may say these commands:
•
USB
•
SYNC
•
Bluetooth Audio
•
Line in
•
Phone
•
Voice settings
•
Cancel
•
Vehicle health report (if
equipped, U.S. only)
•
Help
•
Services (if equipped, U.S. only)
USB:
Say to access the device connected to the USB port.
SYNC:
Say to return to the main menu.
Bluetooth audio:
Say to access/use streaming music from your cellular
phone enabled with
Bluetooth
wireless technology.
Line in:
Say to access the device plugged into your auxiliary input jack.
Phone:
Say to access hands-free phone mode.
Voice settings:
Say to access the voice settings menu. Refer to
Commands for voice settings
in the following section.
Help:
Say at any time for options in a specific mode. SYNC will list
various options for you audibly. The ‘help’ request is always available.
Voice recognition system overview
9
See
End User License Agreement
at the end of this book
2011 SYNC/MGM
(mgm)
Supplement, 2nd Printing
USA
(fus)
