HEATED/COOLED*  

FRONT SEATS

Press the heated seat symbol   to cycle 
through the various heat settings and off. 
Warmer settings are indicated by more 
indicator lights. 

Press the cooled seat symbol   to cycle 
through the various cooling settings and 
off. Cooler settings are indicated by more 
indicator lights. 

MEMORY FUNCTION 

The memory function allows a one-
touch recall of the driver seat, power tilt/
telescoping steering wheel* and power 
mirrors. Use the memory controls located 
on the driver’s door to program and then 
recall memory positions. To program 
position 

1

, press and hold the 

1

 button 

until you hear a chime. Use this same 
procedure to set positions 

2

 and 

3

 using 

the respective buttons. You can now  
use these controls to recall the set 
memory positions.

TILTING HEAD RESTRAINTS

Your vehicle’s front head restraints can be 
adjusted. Pivot the head restraint forward 
by gently pulling the top of the head 
restraint. Once it is in the forward-most 
position, tilting it forward once more will 
release it to the upright position.

NOTE: 

Do not attempt to force the 

headrest backward after it has been tilted. 
Instead, continue tilting it forward until the 
headrest releases to the upright position.

RETRACTABLE  

PANORAMIC ROOF*

Your panoramic roof controls are 
located on the overhead console and 
have a one-touch open and close 
feature. To open the roof, press the   
button. It opens fully and will adjust 
its opening automatically at certain 
speeds to help reduce wind noise. 
You can manually override this feature 
by pressing any button. It resets 
automatically after each ignition cycle. 
To close, press the   button.

COMFORT

* if equipped

FUnCTIOn

* if equipped

HEATED STEERING WHEEL*

To access, press the Climate corner on the 
touch screen. Touch the heated steering 
wheel icon   to warm the steering wheel.

HEATED REAR SEATS*

Press the heated seat symbol   on 
the rear of the center console to cycle 
through the various heat settings and 
off. Warmer settings are indicated by 
more indicator lights.

NOTE: 

The driver is always responsible for controlling the vehicle, supervising the system and intervening if required. Visibility aids do not 

replace the need to watch where the vehicle is moving. Refer to your 

Owner’s Manual

 for safety information, more details and limitations.

REAR VIEW CAMERA 

This system provides a video image 
of the area behind the vehicle. The 
display automatically appears in the 
touch screen when the vehicle is in 
R (Reverse) and uses green, yellow 
and red guides to alert you of your 
proximity to objects.

14

15

FRONT AND REAR  

SENSING SYSTEM*

The front sensors are active when the 
gearshift is in any position other than 
P (Park) or n (neutral) and the vehicle 
speed is below 6 mph (10 km/h).The rear 
sensors are active when the transmission 
is in R (Reverse). As the vehicle moves 
closer to the obstacle, the rate of the 
audible warning increases. This system 
sounds a warning tone if there is an 
obstacle near the vehicle’s front or rear 
bumper, and will increase in frequency  
as the object gets closer.

ACTIVE PARK ASSIST* 

The system detects an available parallel 

parking space and automatically steers 

the vehicle into the space (hands-free). 

The system instructs the driver with visual 

and/or audible instructions with regard to 

braking, accelerating and shifting gears in 

order to safely park the vehicle. 
•  To start active park assist, press the  

 button located on the right side of  

the center stack. 

•  When a suitable space is found, the touch 

screen displays a message and a chime 

sounds. For complete information, refer  

to your 

Owner’s Manual

.

Preproduction model shown.

Preproduction model shown.