Инструкция для Lincoln MKZ Hybrid (2015)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Vehicles Sold In Canada: Getting
Roadside Assistance

Canadian clients who require roadside
assistance, call 1-800-387-9333.

Vehicles Sold In Canada: Using
Roadside Assistance

Canadian Roadside coverage and benefits
may differ from the United States coverage.
Please refer to your warranty information or
visit our website at www.lincolncanada.com
for information on Canadian services and
benefits.

Canadian clients who need to obtain
roadside information, call 1-800-387-9333 or
visit our website at www.lincolncanada.com.

HAZARD WARNING FLASHERS

Note: If used when the vehicle is not running,
the battery will lose charge. There may be
insufficient power to restart your vehicle.

The hazard warning button is
located on the instrument panel.
Use it when your vehicle is

creating a safety hazard for other motorists.

•

Press the button to turn on the hazard
warning function, and the front and rear
direction indicators will flash.

•

Press the button again to turn them off.

FUEL SHUTOFF

WARNING

Failure to inspect and, if necessary,
repair fuel leaks after a collision may

increase the risk of fire and serious injury.
Ford Motor Company recommends that the
fuel system be inspected by an authorized
dealer after any collision.

In the event of a moderate to severe
collision, this vehicle has a fuel pump shut-off
feature that stops the flow of fuel to the
engine. Not every impact will cause a
shut-off.

Should your vehicle shut off after a collision,
you may restart your vehicle.

For vehicles equipped with a key system:

1. Switch off the ignition.

2. Switch on the ignition.

3. Check the information display for the

Ready to Drive light as the gasoline
engine may not start, but the electric
motor may be running. If you do not see
the Ready to Drive light, repeat Steps 1
and 2 up to two more times.

For vehicles equipped with a push button
start system:

1. Press the push button start to switch off

the ignition.

2. Press the brake pedal and press the push

button start to switch on the ignition.

3. Check the information display for the

Ready to Drive light as the gasoline
engine may not start, but the electric
motor may be running. If you do not see
the Ready to Drive light, repeat Steps 1
and 2 up to two more times.

253

MKZ Hybrid (), enUSA

Roadside Emergencies