![background image](/i/lincoln/151255/lincoln-navigator-2012/h/lincoln-navigator-2012-102.png)
Note:
For all vehicles with remote start installed, it is possible to
program all original vehicle keys as MyKeys
威
, in which case, you will
need to use your remote start system to reset all MyKeys
威
as admin keys
by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the
Clear MyKey
威
section.
Troubleshooting
Condition
Potential Causes
Can’t create a MyKey
威
•
Key in the ignition is already a
MyKey
威
•
Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key)
•
SecuriLock
威
passive anti-theft
system is disabled or in unlimited
mode
•
Vehicle has been started using a
remote start system that is
programmed as MyKey
威
. Refer to
Using MyKey
威
with remote start
systems
section.
Cannot program the MyKey
威
optional settings
•
Key in the ignition is a MyKey
威
•
No MyKeys
威
are programmed to the
vehicle. Refer to
Create a MyKey
威
section
•
Vehicle has been started using a
remote start system that is
programmed as MyKey
威
. Refer to
Using MyKey
威
with remote start
systems
section.
Locks and Security
102
2012 Navigator
(nav)
Owners Guide, 1st Printing
USA
(fus)