![background image](/i/lincoln/163924/lincoln-town-car-1997/h/lincoln-town-car-1997-207.png)
205
If the acid touches someone’s skin, eyes, or
clothing, immediately flush the area with water for
at least 15 minutes. If someone swallows the acid,
have him or her drink lots of milk or water first,
then Milk of Magnesia, a beaten egg, or vegetable
oil. Call a doctor immediately.
To avoid damaging your vehicle or your battery,
and to avoid injury to yourself, follow these
directions for preparing your vehicle to jump-start
and connecting the jumper cables in the order they
are given. If in doubt, call for road service.
Preparing Your Vehicle
1.
Your vehicle has a 12-volt starting system, so
you need to use a 12-volt jumper system. You
will damage your starting motor, ignition
system, and other electrical parts if you connect
them to a 24-volt power supply (either two
12-volt batteries in series or a 24-volt generator
set).
2.
Do not disconnect the battery of the disabled
vehicle. You could damage the vehicle’s
electrical system.
3.
Park the booster vehicle close to the hood of
the disabled vehicle.
Make sure the vehicles
do not touch each other.
Set the parking
brake on both vehicles and stay clear of the
engine cooling fan and other moving parts.
4.
Check all battery terminals and remove any
excessive corrosion before you attach the
jumper cables.
5.
Turn on the heater fan in both vehicles. Press
the DEFROST button. Turn off all other
switches and gauges.
File:10fnert.ex
Update:Thu Jun 20 15:16:36 1996