![background image](/i/loewe/153191/loewe-art-40-art-50-art-60/h/loewe-art-40-art-50-art-60-037.png)
Connect ID 40-55
- 37 -
Quick guide
english
Conditional Access module (CA module)
In order to receive coded digital stations, a Conditional Access mod-
ule (CA module) and a Smart Card must be inserted in the CI slot of
your TV set.
The CA module and the Smart Card are not part of the set of equip-
ment supplied with the TV set. They are usually available from your
dealer. Loewe does not provide any guarantee for the functioning of
the CA module.
The TV set must first recognise and set up the CA module during initial
operation. Therefore, it can take up to a minute until decoding starts
during initial operation.
Inserting the Smart Card into the CA module
Push the Smart Card into the CA module as far as it will go. The side
of the card with the golden chip on it should be pointing towards the
thicker side of the insertion slot (see illustration). Note the direction
of the arrow printed on the Smart Card.
Inserting the CA module into the TV set’s CI slot
Switch off TV set using the mains switch.
Remove the cover from the rear of the set.
Insert the CA module carefully into one of the two CI slots, ensuring
that the contact side goes in first. Do not use force. Make sure the
module is not twisted in the process. Push the CA module in as far as
it will go.
Finally, close the side cover.
Smart Card
CA module
Contact side
Searching for encrypted stations
HOME:
Calling the
Home
view.
Select
System settings
,
OK
call System settings.
Mark
Stations
,
go to next column.
Automatic scan TV+Radio
,
go to next column.
Select
Change search settings
,
OK
wizard guides you through the search settings.
Under
scrambled stations
you have to select
yes
.
Next select
Start search/update
,
OK
start updating the station list.
Calling CA module information
This menu is only available when a CA module is
plugged in.
HOME:
Calling the
Home
view.
Mark
Extras
,
OK
call Extras.
Select desired CA module.
The indicated name depends on the inserted
CA module.
go to next column.
Select
CA module
,
OK
call information.
The content of this menu depends on the provider of
the CA module.
Removing the CA module
Switch off TV set using the mains switch.
Remove the cover from the rear of the set.
Pull the CA module out of the CI slot.
Close the side cover.
Extras
CA module