6
|
Studiophile AV 20 User Guide
Appendix B - Technical Specifications
Type:
Two-way desktop reference monitor
LF Driver:
2” composite paper/fiberglass cone woofer, magnetically shielded
HF Driver:
1” ferro-fluid cooled, Mylar balanced-dome tweeter
Frequency
Response:
120Hz-20KHz ±3 dB
Crossover
Frequency:
2.8 kHz
RMS SPL:
90dB@1 meter
S/N Ratio:
>80dB typical A-weighted
Input
Connector:
Left and right RCA Line input
Polarity:
Positive signal at + input produces outward low-frequency cone displacement
Dynamic
Power:
10 watts into 4 ohms per channel, Class-D amplifier
Input
Impedance:
10K ohms unbalanced
Input
Sensitivity:
100mV pink noise input produces 84dBA output SPL at one meter with
volume control at maxmium
Protection:
RF interference, output current limiting, over temperature, turn on/off transient,
subsonic filter
Indicator:
Blue power LED ring around volume knob on front panel
Power
Requirements:
Factory programmed for either 100-120V~50/60Hz, 220-240V~50/60Hz
Cabinet:
Vinyl-laminated MDF
Dimensions:
7.8”(H) x 3.9”(W) x 6.16”(D)
Weight:
4.6kg
Specifications subject to change without notice
© 2006 Avid Technology, Inc. All rights reserved. Product features, specifications, system
requirements and availability are subject to change without notice. Avid, M-Audio and Studiophile
AV 20 are either trademarks or registered trademarks of Avid Technology, Inc. All other trademarks
contained herein are the property of their respective owners.
