9

Studiophile BX8a

English

Appendix A - Technical Specifications 

Type:

2-way near-field studio reference monitors

LF Driver:

8-inch Kevlar curved cone with high temperature voice coil and damped 
rubber surround. 

HF Driver:

1-inch magnetically shielded natural silk dome 

Frequency Response:

40Hz - 22kHz 

Crossover Frequency:

2.2kHz 

LF Amplifier Power:

70W 

HF Amplifier Power:

60W 

Maximum S/N: 
(dynamic range)

> 100dB typical A-weighted

Input Connectors:

1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector 

Polarity:

positive signal at + input produce outward LF cone displacement 

Input Impedance:

20k ohms balanced,10k ohms unbalanced 

Input Sensitivity:

85mV pink noise input produces 90dBA output SPL at one meter with volume 
control at maximum 

Protection:

RF interference, output current limiting, over temperature, turn-on/off 
transient, subsonic filter, external mains fuse. 

Indicator:

power on/off indicator on rear panel 

Power Requirements:

factory programmed for either 115V ~50/60Hz, 230V~50/60Hz

Cabinet:

vinyl-laminated MDF 

Dimension:

12” (H) x 10” (W) x 15” (D) 

Weight:

26.4 lbs. unit 11.97 kg

* Above specifications subject to change without notice 

Your BX8a Warranty 

Warranty Terms

M-Audio  warrants  products  to  be  free  from  defects  in  materials  and  workmanship,  under 
normal  use  and  provided  that  the  product  is  owned  by  the  original,  registered  user.    Visit  
www.m-audio.com/warranty for terms and limitations applying to your specific product.

Warranty Registration

Thank  you  for  registering  your  new  M-Audio  product.  Doing  so  immediately  both  entitles  you  to  full 
warranty coverage and helps M-Audio develop and manufacture the finest quality products available. 
Register online at www.m-audio.com/register to receive FREE product updates and for the chance to win 
FREE M-Audio gear.