![background image](/i/maxima/131497/maxima-mic-0246/h/maxima-mic-0246-020.png)
20
II. OPeartING tHe INDuCtION COOKer
MAXIMA induction cooker is supplied with automatic work test system. In
case of any deviation from normal operating mode or any damage induction
plate will switch off automatically and error code will de shown on display.
ERROR CODE
POSSIBLE CAUSES
REMEDY
E0
1. There is no dish on the
plate;
2. Diameter of dish is less
than 12 cm and more than
16 cm;
3. There is a dish made of un-
appropriate material.
Put the dish made of appropri
-
ate material on the plate.
E1
The voltage is lower than 100V
Appliance voltage is 220-240 V.
E2
The voltage is higher than 275V
Appliance voltage is 220-240 V.
E3
The bottom Thermistor is at
short circuit condition
Apply to an authorized service-
centre.
E4
The bottom Thermistor is at
open circuit condition
Apply to an authorized service-
centre.
E5
The IGBT’s sensor is at open
circuit condition
Apply to an authorized service-
centre.
E6
The IGBT’s sensor is at short
circuit condition
Apply to an authorized service-
centre.
E7
Circuit failure
Apply to an authorized service-
centre.
Place the induction cooker on flat
surface.
Watch over the steam does not get furni
-
ture or walls during cooking.
1.