Hunting test

Network line (as below)

1. Open battery cover, install DC 9V battery in launcher,  push the key 
to “scan”, its indicator flashes, which means the transmitter work well.
2. Connect one end of telephone line to the RJ11 port of launcher.
3. push the key to “scan” of receiver, then its indicator flashes, which 
means the receiver is normal. then hold the receiver to find the 
target line. 
4. In the process, press the button of “Set” to choose your ideal volumn.

Note: Never put a telephone cable into RJ45 Port, especially a 
charged one, for fear of burnout to the tester 

1. Open battery cover, install DC 9V battery in launcher, push the key 
to “scan”, its indicator flashes, which means the transmitter work well.
2. Connect one end  of network line to the RJ45 port of launcher.
3. push the key to “scan” of receiver, then its indicator flashes, 
which means the receiver is normal. then hold the receiver to find 
the target line. 
4. In the process, press the button of “Set” to choose your ideal volumn.

Telephone line(as below)

Your excellent helper in cable test!

06