BNC LINE Sorting function
BNC Line
s
BNC Line
s
BNC Line
s
BNC Line
s
Attention: Do not allow to use this device with strong current wires
1.Insert the two of the BNC connectors to
the corresponding interface of
the emitter and receiver respectively.
2.Push the Function switch over button of
emitter to
“
TEST
”
, the wire sequence
indicator will light, which indicates the
emitter is working.
3.Judge the short circuit, open circuit, cross according to
the 4 indicators;
4.The specific operation shows below:
Spotlight function
To work easily as usual while
turn on the light switch at night and in dark.
To judge miswire, short, open, circuit of coax cable with the
method of automatic scan.
Your excellent helper in cable test!
06
