![background image](/i/noyafa/141317/noyafa-nf-hdmi-ii/h/noyafa-nf-hdmi-ii-013.png)
Your excellent helper in cable test!
12
●
●
●
Open
: Master unit and Remote unit both no connected
pins LEDs are off.
(Fig 8.)
Short
: Master unit testing short pin LEDs brighter
than others. Remote unit shorted pins LEDs are off.
(Fig 9.)
Crossover
: It can't be tested on this mode.
Master unit with Remote unit slow continuity
scan testing function:
1
.
Press “ TEST button during LED indicate automatic
testing result or Press twice “ TEST” button before LED
off for perform automatic testing, it will continually scan
#1~#19 pin and shield conductor. Master unit and
Remote unit both #1~19 and Shield LEDs will light up in
sequence very slow and sustained repeated automatic
scan.
2.LED indicate testing result as below
:
: Master unit and Remote unit both testing
pins #1~19 and Shield LEDs are all lighted up in sequence.
(Fig 7.)
Open
: Master unit and Remote unit both LEDs are
off when scan to no connected pins, others LEDs are
all lighted up in sequence. Example : Test HDMI
(A Type) to HDMI (A Type) cable that pin #2
、
#5
、
#8
、
#11 are not connected, or test HDMI (A Type) to
Mini-HDMI (C Type) cable that pin #1
、
#4
、
#7
、
#10
are not connected, or test Mini-HDMI (C Type) to
Mini-HDMI (C Type) cable that pin #1
、
#4
、
#7
、
#10
are not connected.
(Fig 8.)
”
Straight
●
●