![background image](/i/noyafa/141629/noyafa-nf-hdmi/h/noyafa-nf-hdmi-009.png)
Your excellent helper in cable test!
08
Note
Master unit with Remote unit automatic
testing function
※
Insert one of A type connector of cable to Master
unit MAIN (A Type) socket and insert the other one
to Remote unit A Type connector for test HDMI
cable A type to A type.
※
Insert A type connector to Master unit LOOPBACK
(A Type) and insert C type connector to Remote unit
Mini-HDMI (C Type) for test HDMI cable A type to
Mini-HDMI (C Type).
※
Insert one of C type connectors of cable to Master
unit Mini-HDMI (C Type) socket and insert the other
one to Remote unite (C Type) socket for test HDMI
cable Mini-HDMI (C Type) to Mini-HDMI (C Type)
socket.
1.Slide upper left switch to “CONTINUITY” then
“POWER” LED lights up. Master unit #1~19 and
“Shield” LEDs will all light up
2
.
LED indicates test result as below:
Straight
:
Master unit and Remote unit both
testing pin #1~19 and “Shield” LEDs are all
lighted up.
(Fig 3.)
Open
:
Master unit and Remote unit both no
connected pins LEDs are off.
(Fig 4.)
●
●