ENGLISH

5

CAUTION

INDOOR UNIT AND OUTDOOR UNIT

Do not wash the indoor unit with water, 

benzene, thinner or scouring powder to avoid 

damage or corrosion at the unit.
Do not use for preservation of precise equipment, 

food, animals, plants, artwork or other objects. 

This may cause quality deterioration, etc.
Do not use any combustible equipment in front 

of the airflow outlet to avoid fire propagate.
Do not expose plants or pet directly to airflow to 

avoid injury, etc.

Do not touch the sharp aluminium fin, 

sharp parts may cause injury.

Do not switch ON the indoor unit when waxing 

the floor. After waxing, aerate the room properly 

before operating the unit.
Do not install the unit in oily and smoky areas to 

prevent damage to the unit.
Do not dismantle the unit for cleaning purpose 

to avoid injury.
Do not step onto unstable bench when cleaning 

the unit to avoid injury.
Do not place vase or water container on the 

unit. Water may enter the unit and degrade the 

insulation. This may cause an electric shock.
Do not left the window open during Cool/Dry 

mode operation to prevent water leakage.
Ensure drainage pipe is connected properly and 

keep drainage outlet clear of gutters, containers 

or does not immersed in water to prevent water 

leakage.
After long period of use or use with any 

combustible equipment, aerate the room 

regularly.
After long period of use, make sure the 

installation rack is not deteriorate to prevent the 

unit from falling down.

REMOTE CONTROL

Do not use rechargeable (Ni-Cd) batteries.

It may damage the remote control.

To prevent malfunction or damage of the remote 

control:

•  Remove the batteries if the unit is not going to 

be used for a long period of time. 

•  New batteries of the same type must be 

inserted following the polarity stated. 

POWER SUPPLY

Do not pull the cord to disconnect the plug to 

prevent electric shock.

WARNING

POWER SUPPLY

If the supply cord is damage, it must be 

replaced by the manufacturer, its service agent 

or similarly qualified persons in order to avoid 

a hazard.
It is strongly recommended to be installed 

with Earth Leakage Circuit Breaker (ELCB) 

or Residual Current Device (RCD) to prevent 

electric shock or fire.
To prevent overheating, fire or electric shock:

• Insert the power plug properly.

•  Dust on the power plug should be periodically 

wiped with a dry cloth.

Stop using the product when any abnormality/

failure occurs and disconnect the power plug or 

turn off the power switch and breaker.

(Risk of smoke/fire/electric shock)

Examples of abnormality/failure

•  The ELCB trips frequently. 

•  Burning smell is observed.

•  Abnormal noise or vibration of the unit is 

observed.

•  Water leaks from the indoor unit. 

•  Power cord or plug becomes abnormally hot.

•  Fan speed cannot be controlled.

•  The unit stops running immediately even if it is 

switched on for operation.

•  The fan does not stop even if the operation is 

stopped.

Contact immediately your local dealer for 

maintenance/repair.

Replacement or installation of power plugs shall 

be performed by authorized/qualified personnel 

only. The wires in this mains lead are coloured 

in accordance with the following code:

Terminals

Red

wires

live

neutral

earth

colours (IEC Standard)

blue

green-yellow

brown

Black

Green/Yellow

Wiring colour may vary depending on a country 

wiring code’s standard.
This equipment must be earthed to prevent 

electric shock or fire.

Prevent electric shock by switching off the 

power supply and unplug when:

- Before cleaning or servicing.

- Extended non-use.

- Abnormally strong lightning activity.