12. English Quick Start
54
12.4 Recording paper
A
Open the top cover by pressing the top cover release button
(
1
).
B
Install the recording paper.
C
Insert the leading edge of the paper into the opening above
the thermal head (
1
).
D
Pull the paper out of the unit.
L
Make sure that there is no slack in the paper roll.
E
Close the top cover securely by pushing down on both sides.
F
For KX-FT982:
Press
{
FAX/START
}
, then tear off the excess paper by pulling
it towards you.
For KX-FT984/KX-FT988:
Press
{
FAX/START
}
to cut the paper.
Quick Start
Correct
Incorrect
1
1
Note:
L
If the paper is secured with glue or tape, cut approximately
15 cm from the beginning of the roll before installing it.
L
When the power cord is connected, a message is printed
each time the top cover is opened then closed. If the
recording paper is installed upside down, the message will
not be printed. Install the paper correctly.
{
FAX/START
}
{
FAX/START
}
FT982RU-988CA-PNQX1343ZA-OI-ru.book Page 54 Monday, May 26, 2008 4:26 PM
