20

20

21

[Image quality]
Specify the image quality of JPEG images. 
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
Default: 5 Normal
     

Configure the settings relating to H.264 images [JPEG/H.264]

Click the [JPEG/H.24] tab on the "Image" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
Configure the settings relating to H.264 image such as "Max bit rate (per client)*", "Image capture size", "Image 
quality", etc. in this section. 
Refer to page 19 for further information about the settings relating to JPEG images. 
     

■

 H.264 (1) · H.264 (2)

[H.264 transmission]
Select "On" or "Off" to determine whether or not to
transmit H.264 images. 
On: Transmits H.264 images. 
Off: Does not transmit H.264 images. 
Default: On

Note:

 •  When "On" is selected for "H.264 transmission" in

"H.264(1)", displaying of H.264 images or JPEG 
images on the "Live" page will be available. 

 •  When "On" is selected for "H.264 transmission" in

"H.264(1)" and "H.264(2)", H.264 images are view-
able using other devices with each setting. 

 •  When "On" is selected for "H.264 transmission" in

"H.264(1)" or "H.264(2)", the transmission interval of 
JPEG images may sometimes become longer. 

 
[Internet mode (over HTTP)]
Select "On" when transmitting H.264 images via the
Internet. It is possible to transmit H.264 images without 
changing the broadband router settings configured for 
JPEG image transmission. 
On: H.264 images will be transmitted using the HTTP 

port. Refer to page 45 for further information about 
the HTTP port number settings. 

Off: H.264 images will be transmitted using the UDP 

port. 

Default: Off