12
Mounting to Camera
Remove the hot shoe cover from the camera.
Attach the flash unit to the camera.
Turn the locking lever of the flash unit in the
direction opposite to that indicated by (FIX
➝
)
(clockwise from the direction of the LCD
panel).
Slide the hot shoe foot of the flash unit into the
camera's hot shoe from the back of the
camera forward.
Turn the locking lever of the flash unit in the
direction indicated by (FIX
➝
) to lock it.
●
The following cameras have a shoe lock pin.
When attaching the flash unit, turn the locking
lever in the (FIX
➝
) direction and lock the flash
unit to the camera with the shoe lock pin. When
releasing the flash unit, be sure to do so after
turning the locking lever in the direction
opposite to that indicated by (FIX
➝
) and
loosening the shoe lock pin. Otherwise, the hot
shoe will be damaged.
645D, K series, *ist D series, *ist, MZ-S,
MZ-L/ZX-L/MZ-6, MZ-60/ZX-60
●
The 67
2
does not come with a hot shoe. The
optional hot shoe grip 67
2
should be used.
1
1
2
2
AF360FGZ_OPM_ENG.book Page 12 Friday, January 14, 2011 12:58 PM