117
3
Taki
ng Pi
ct
ur
es
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are taken. The default setting is
O
(On).
1
Press the
3
button in
A
mode.
The [
A
Rec. Mode] menu appears.
2
Use the four-way controller (
23
) to select [Instant
Review].
M
When the shutter release button is pressed halfway with [Shake
Reduction] set to [CCD-Shift] or [Dual].
l
When [Shake Reduction] is set to [Off]. (If the camera shake is likely to
occur,
f
is indicated when the shutter button is pressed halfway.)
• When [Shake Reduction] is set to [Dual], camera shake is corrected
after shooting, and then the corrected image is saved.
• When [Shake Reduction] is set to [CCD-Shift], CCD shifting sound
may occur during shooting with
C
Burst Shooting(H). This is not
malfunction.
In the following situations, [Shake Reduction] cannot be set to [Dual]
(only [CCD-Shift] or [Off] can be selected in the pull-down menu.). If
[Shake Reduction] is set to [Dual] beforehand, setting automatically
changes to [CCD-Shift].
- When
C
(Movie),
S
(Fireworks),
N
(Frame Composite),
X
(Digital Wide) or
F
(Digital Panorama) mode is selected as the
shooting mode
- When
g
(Self-timer),
j
(Continuous Shooting),
A
(Burst
Shooting(L)),
B
(Burst Shooting(M)) or
C
(Burst Shooting(H)) is
selected as the drive mode
- When the flash discharges
- When the shutter speed is slower than 1/4 sec.
- When the sensitivity is set to 1600 or higher
- During Voice Recording
Setting the Instant Review