184
8
Connec
ting
to
a C
o
m
p
u
ter
Connect your camera to the computer using the provided USB cable
(I-USB116).
1
Turn the computer on.
2
Turn your camera off.
3
Connect your camera to the computer using the USB
cable.
Face the
}
mark on the USB cable towards the
4
mark on the
camera, and connect the cable to the PC/AV terminal.
4
Turn your camera on.
The camera is recognized by the computer.
Connecting the Camera and the Computer
If the battery runs out of power while images are being transmitted to the
computer, the image data may be lost or damaged. Charge the battery
fully before connecting your camera to the computer.
• The self-timer lamp blinks while the camera is connected to a
computer.
• If there is no SD Memory Card in the camera, the images stored in the
built-in memory can be viewed with a computer.
• For information on system requirements, refer to p.186.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
