![background image](/i/pentax/157233/pentax-wg-4-gps/h/pentax-wg-4-gps-183.png)
181
6
Se
tti
ngs
You can automatically transfer images to a computer or other devices via a
wireless LAN using a commercially available Eye-Fi card. For details on
transferring images, refer to “Transferring Images Using an Eye-Fi Card” (p.202).
The default setting is
P
(Off).
1
Use the four-way controller (
23
) to select [Eye-Fi] in the
[
W
Setting] menu.
2
Use the four-way controller (
45
) to select
O
(On) or
P
(Off).
O
(On) Turns on communication using an Eye-Fi card
P
(Off) Turns off communication using an Eye-Fi card
3
Press the
4
button.
The setting is saved.
You can adjust the brightness of the display to 7 levels.
1
Use the four-way controller (
23
) to select [Brightness Level]
in the [
W
Setting] menu.
2
Use the four-way controller (
45
) to adjust the brightness.
F
Dark
G
Normal
H
Bright
Setting the Eye-Fi Communication
To establish an Eye-Fi communication, you first have to specify a wireless
LAN access point and transfer destination on the Eye-Fi card. For details on
how to set up the card, refer to the operating manual supplied with the Eye-
Fi card.
Adjusting the Brightness of the Display