Problem

Possible cause

Solution

The appliance 

produces a loud 

pumping sound.

The water tank is empty.

Fill the water tank with water and press 

the steam trigger until the pumping sound 

becomes softer and steam comes out of 

the soleplate.

Water droplets 

come out of the 

soleplate.

After the Calc-Clean process, 

remaining water may drip out of 

the soleplate.

Wipe the soleplate dry with a piece of 

cloth. If the Calc-Clean light still flashes and 

the appliance still beeps, perform the Calc-

Clean process (see chapter ‘IMPORTANT 

- Cleaning and maintenance’).

The Calc-Clean process has not 

been completed.

You have to perform the Calc-Clean 

process again (see chapter ‘IMPORTANT - 

Cleaning and maintenance’).

Dirty water and 

impurities come 

out of the 

soleplate.

Impurities or chemicals present 

in the water have deposited in 

the steam vents and/or 

soleplate.

Perform the Calc-Clean process regularly 

(see chapter ‘IMPORTANT - Cleaning and 

maintenance’).

Water flushes 

out of the 

soleplate.

You have accidentally started 

the Calc-Clean process (see 

chapter ‘IMPORTANT - 

Cleaning and maintenance’).

Switch off the appliance. Then switch it 

back on again. Turn the temperature dial to 

the desired temperature setting instead of 

CÁLC CLEAN. Let the iron heat up until 

the ‘iron ready’ light lights up steadily.

The Calc-Clean 

process does not 

start.

You have not set the 

temperature dial to CALC 

CLEAN or you have not waited 

for the iron to heat up.

See chapter ‘IMPORTANT - Cleaning and 

maintenance’.

You have not pressed the Calc-

Clean button for 2 seconds until 

the appliance started beeping.

See chapter ‘IMPORTANT - Cleaning and 

maintenance’.

ENGLISH

9