![background image](/i/pioneer/163283/pioneer-deh-2910mp/h/pioneer-deh-2910mp-009.png)
!
When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the station
’
s AF list. (This is only
available when using presets on the
F1
or
F2
bands.) No preset number appears on the dis-
play if the RDS data for the station received
differs from that for the originally stored sta-
tion.
!
Sound may be temporarily interrupted by an-
other program during an AF frequency
search.
!
AF can be turned on or off independently for
each FM band.
Using PI Seek
If the tuner can
’
t find a suitable station, or re-
ception status becomes bad, the unit will auto-
matically search for a different station with a
same programming. During the search,
PI SEEK
is displayed and the output is muted.
Using Auto PI Seek for preset stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
!
The default setting for Auto PI Seek is off.
See
Limiting stations to regional
programming
When AF is used, the regional function limits
the selection of stations broadcasting regional
programs.
1
Press FUNCTION to select REG.
2
Press
a
or
b
to turn the regional func-
tion on or off.
Notes
!
Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
!
The preset number may disappear from the
display if the tuner tunes in a regional station
which differs from the originally set station.
!
The regional function can be turned on or off
independently for each FM band.
Receiving traffic announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other network
’
s TP station (a station
carrying information which cross-references
TP stations).
1
Tune in a TP or enhanced other net-
work
’
s TP station.
TP
indicator will light.
2
Press TA to turn traffic announcement
standby on.
#
To turn traffic announcements standby off,
press
TA
again.
3
Use VOLUME to adjust the TA volume
when a traffic announcement begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4
Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until
TA
is pressed
again.
#
You can also cancel the announcement by
pressing
SOURCE
,
BAND
,
a
,
b
,
c
or
d
while a
traffic announcement is being received.
Notes
!
You can also turn the TA function on or off in
the menu that appears with the pressing of
FUNCTION
.
Operating this unit
En
9
English
Section
02