![background image](/i/president/156402/president-freecomm-150/h/president-freecomm-150-015.png)
The channel number on the LCD Screen changes rapidly until an
active signal is detected.
During CHANNEL SCAN mode.
Press and hold the
PTT
button you can talk to others who use same
channel.
Press the
C
button to change to CALL function and to send a CALL
TONE on that active channel.
Press and hold SCAN
S
button again for 1 second to deactivate
CHANNEL SCAN mode.
2. When an active signal (one of 8 channels) is detected. CHANNEL
SCAN pauses, keeping the active signal broadcasted.
3. Press the
PTT
button to communicate through the active signal
channel and CHANNEL SCAN is deactivated.
4. When an active signal (one of 8 channels) is detected, but another
channel is desired, press the Up or Down button to bypass the
current channel and continue to search for another active channel.
Sending Call Tones
You can use CALL TONES to alert the other when you are attempting
to contact them. You can also use CALL TONES to signal the beginning
or the end of a transmission.
1. Press the
C
button twice shortly, the red TX LED indicater will light
up and the CALL TONE continues for 3 seconds.
2. Release the
C
button, your CALL TONES will transmit to nearby
receivers set to the same channel.
15