![background image](/i/president/156327/president-pm-2000-wp/h/president-pm-2000-wp-051.png)
51
Deleting a Channel from Memory
1.
Select the channel to delete from memory by pressing the
▲
or
▼
button.
2.
Press the
MEM
button.
“MEM” dis-
appears from the display.
Scanning
1.
To begin scanning the programmed
channels, press the
SCAN
button.
“SCAN” and “TRIPLE” appear on the
display.
2.
To stop scanning, press the
SCAN
button once more.
“SCAN” and “TRIPLE” disappear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel
until the transmission ends, then resumes scanning after a
3 second delay period.
• When in the scan mode, the unit automatically activates
the Triple Watch feature. To deactivate Triple Watch from
the scanning mode, press the
TRI
button.
“TRIPLE” disap-
pears from the display.
Transmitting
1.
Transmission power can be set to either 5W or 1W.
Press the
1/5W
button to make the
change, then the
“5W” or the “1W” in-
dicator on the display changes ac-
cordingly.
2.
To transmit, press and hold the
PTT
key.
“TX” appears on
the display.