![background image](/i/prestigio/160506/prestigio-multireader-3474-per3474b/h/prestigio-multireader-3474-per3474b-007.png)
7’ eBook Reader
EN-7
Getting Started
Charging the Reader
You need to charge the Reader prior to using it for the first time or when battery
power is low.
Note:
It’s recommended to charge the battery for 4 hours before the first time
use. Normally it takes approximately 4~5 hours to fully charge the device.
Recharge the device as soon as possible when the battery is in low-power level
shown as
.
icon appears once the battery is fully charged.
You can charge the Reader by:
Inserting DC connector to the DC port
on the device and connecting power
adapter to wall socket for charging.
Connecting the host PC USB port
and the device with the included USB
cable to start charging.
Note:
When charging through PC, you cannot operate the Reader. To operate the
reader during charging, click the Safely Remove Hardware icon on your desktop
with the Reader connected to PC. Click any button on the Reader to go from “USB
Connection” screen.
Do need play video while connecting to PC for charging. Power from USB port may
not be enough to support charging.
Switch the Reader to stand-by mode to speed up the charging process.