OPERATION AND CONNECTION

• Bluetooth matching mode: Turn on the power, the default 

state is Bluetooth playing mode. If it is the first time to use the 

speaker for Bluetooth matching, you can match the Bluetooth 

speaker when the BLUE light is flashing. 

• The matching Bluetooth equipment identification for this 

speaker is "SP-2013BT". Some playbacks need to input the 

Password “0000” when connect to the Bluetooth.

• LINE IN playing mode: when input the line in cable, the BLUE 

light will be bright. No volume changing under the LINE IN 

playing mode. 

• Charging status: When charging, the BLUE light is on bright. 

When the power is charging full, the BLUE light will put out. 

IMPORTANT

Please unplug the system if any of the following conditions 

exist:

• USB cable becomes frayed or otherwise damaged.

• Your system has been dropped or the enclosures have been 

otherwise damaged.

• Liquid has been spilt into a speaker enclosure.

• You suspect that your system needs repairing.

• Your system is exposed to rain or any other excessive moisture.

TROUBLESHOOTING

If you experience problems during the installation of your 

system please first check the following conditions:

• Make sure all the connections between the system and devices 

are fully seated.

• Make sure that the power supply is switched on.

• Check the LED light on speaker. If it is not illuminated, please 

check the power connection, if you use wireless method of 

speaker's connection please check the battery charge.

• If connected to a non-standard game console or audio device, 

please consult the manual of those devices for connection. 

CLEANING

• Unplug this product from the power source before cleaning. 

Do not use liquid or aerosol cleaners. Use a soft cloth for 

cleaning. 

WARNING

• Electrical equipment may be hazardous if misused.

We are improving the quality of our products, so some charac

-

teristics can be changed without notification.