![background image](/i/rucelf/136755/rucelf-sdf-8000/h/rucelf-sdf-8000-037.png)
37
eng
9. Safety measures
ATTENTION! The stabilizer RUCELF is the device of an alternating current of
50 Hz. The total power consumption of electrical appliances, should not exceed
the calculated total load power (see item.4).
Inside of device case there is a dangerous voltage more than 220 V,
frequency 50 Hz.
Only person, who have studied this instruction can work with the device.
IT IS FORBIDDEN:
• to work with the device during appearance of a smoke or smell, as for the
burning isolation, appearance of a noise or vibration, breakage or cracked
case and with the damaged connectors;
• to cover the device with any materials, to place something on the device, to
close vent holes or to inset foreign objects inside
• to use the device in the explosive or chemically active medium, destroying
metals and isolation, in the conditions of drops or splashes, and also on the
open areas;
• to leave the device unattended or without operating personnel
• to use the device without GROUNDING (grounding is on the terminal,
located on the case);
10. Transport and storage regulations
Transportation should be made in the package of the manufacturer.
It is possible to transport by any kind of land (in the closed compartments),
river, sea, air (in closed hermetic compartments) transport without distance
and speed restriction for this kind of transport.
The devices should be stored in the manufacturer packing, with
temperature -10…+45°C, relative humidity 80 %.
There is should not be a dust, acids and alkalis vapors in the stowers.