![background image](/i/russell-hobbs/169915/russell-hobbs-steam-glide/h/russell-hobbs-steam-glide-003.png)
3
14 Don’t use accessories or attachments other than those we supply.
15 Don’t use the appliance for any purpose other than those described in these instructions.
16 Don’t scratch the soleplate – avoid buttons, zips, etc.
17 The appliance has a protective thermal fuse, which will blow if it overheats. If this happens,
the appliance will stop working, and must be returned for repair.
18 Don’t operate the appliance if it’s dropped or damaged, or if it malfunctions or leaks.
19 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
U
BEFORE USING FOR THE FIRST TIME
•
Remove any labels, stickers or packaging from the iron and soleplate.
•
Don’t worry if the iron smokes a bit at first, it’ll stop as the element cures.
•
Iron an old piece of cotton fabric, to clean the soleplate.
C
PREPARATION
1 Check for textile care symbols (
i j k l
).
2 Iron fabrics needing low temperatures
j
first, then those that need medium temperatures
k
, and finish with those needing high temperatures
l
.
temperature setting guide
label marking
temperature setting
j
cool – nylon, acrylics, polyester
•
k
warm – wool, polyester mixtures
••
l
hot – cotton, linen
•••
/
max
i
do not iron
,
If the instructions on the fabric label differ from this guide, follow the instructions on the
label.
X
FILLING
3 Press the
b
button.
4 Press the
d
button.
5 Unplug the appliance.
6 Remove the reservoir.
a) Grip the bottom front of the reservoir
b) Press the catch on the top rear of the reservoir.
c) Pull the reservoir out of the base unit
d) MAX is marked across the top of one of the tubes.
e) Pour water into the other tube
f) Don’t add anything to the water – you’ll damage the iron.
g) Fill the reservoir to the
MAX
mark.
7 Replace the reservoir.
8 Slide the reservoir into the base unit till the catch clicks into place.
9 Initialize the iron.
ins
tru
cti
ons
diagrams
1 cap
2 hole
3 steam button
4 lock
5 thermostat light
6 cable and steam pipe
7 temperature control
8 steam vents
9 soleplate
10 catch
11 nozzle
12 reservoir
13 base unit
14 grip
15 lights
16 buttons
17 anti-scale cartridge
18 water
19 press to initialize