English _
39
SELF RECORD USING THE REMOTE CONTROL (SETTING THE SELF TIMER)
(VP-D392( i )/D395i only)
The SELF TIMER function works only in
Camera
mode.
➥
page 18
When you use the SELF TIMER function on the remote control, the recording begins automatically in 10 seconds.
1.
Set the
Select
switch to
TAPE
. (VP-D395i only)
2.
Press the
MODE
button to set
Camera
(
).
3.
Press the
SELF TIMER
button.
The ( ) indicator is displayed.
4.
To record movie images, press the
Recording start/stop
button.
Self timer starts counting down from 10. At this moment, recording indicator
blinks with a beep sound.
At the last second of the countdown, recording starts automatically.
If you want to cancel the self timer function before recording, press the
SELF TIMER
button again.
Do not obstruct the remote control sensor by putting obstacles between
the remote control and miniDV camcorder.
The remote control maximum range is 4 to 5m (13 to17 ft).
The effective remote control angle is up to 30 degrees left /right from the
centre line.
Using a tripod (not supplied) is recommended during self record.
•
•
•
•
•
•
•
•
•
•
BATT.
CHG
MODE
TAPE
CARD
16BIt
16Bit
S
10Sec
10Sec
C.Nite 1/30
C.Nite 1/30
60min
60min
0:00:30
0:00:30
SP
STBY
STBY
10Sec
10Sec
16:9 Wide
16:9 Wide
(VP-D395i only)