![background image](/i/samsung/109308/samsung-lw-46g15-w/h/samsung-lw-46g15-w-044.png)
English - 44
Selecting the Sound Mode
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
➢
◆
If the receiving conditions deteriorate, listening will be
easier if the mode is set to the
Mono
.
◆
If the stereo signal is weak and automatic switching
occurs, switch to the
Mono
.
◆
When receiving mono sound in AV mode, connect to the
“AUDIO-L” input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the
DUAL I-II
button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
Bilingual or Dual I/II
Stereo
On-screen indication
Mono
(Normal use)
NICAM
↔
NICAM
Mono
NICAM
↔
Mono
Stereo
(Normal)
Mono
(Normal use)
Dual I
↔
Dual II
Stereo
↔
Mono
(Forced mono)
NICAM
→
NICAM
→
Mono
Dual I
Dual II
(Normal)
NICAM
Stereo
A2
Stereo
→
→
BN68-00746A(GAIA2_Euro_ENG) 2004/08/23 03:55 PM Page 44